联合循环中旁路系统蒸汽流量计算及其应用

高/低压蒸汽旁路流量精确控制是提高联合循环电厂灵活性的重要部分,在旁路阀厂家提供资料不完善的情况下,通过研究阀门实际的流动特性,简化了阀门流动模型,参照相关的阀门流量计算经验公式,对其中一些系数进行近似处理,最终根据旁路的设计数据表拟合出旁路流量计算公式并对其进行应用验证,100%甩负荷时高压蒸汽系统压力上升变化仅有2%,满足了约旦侯赛因燃气-蒸汽"三拖一"联合循环机组的运行要求,可为其他电厂在旁路系统控制及提高电厂灵活性方面提供借鉴。     

Comparison of γ-aminobutyric acid accumulation capability in different mung bean (Vigna radiata L.) varieties under heat and relative humidity treatment,and its correlation with endogenous amino acids and polyamines

In this study, the accumulation of GABA and its inherent factors across different varieties of mung bean (Vigna radiata L.) in response to heat and relative humidity (HRH) were investigated. Results showed the average GABA content in mung bean varieties was increased 7.52 times following HRH treatment, and the black mung bean variety (A8) exhibited the highest GABA accumulation capability (1.76–84.57 mg per 100 g DW). From the perspective of GABA shunt metabolites, the free glutamic acid content of mung beans significantly decreased (P < 0.05) after HRH treatment and presented a significant correlation (P < 0.05) with GABA content. In polyamine degradation pathway, although the average levels of spermine and spermidine of mung bean varieties significantly decreased (P < 0.05) after HRH treatment, no significant correlation with GABA content was identified. Hence, the GABA accumulation was predominantly attributed to GABA shunt. Besides, free amino acids including glutamic acid, serine, ornithine, arginine and glycine in mung beans showed a significant positive correlation (P < 0.05) with GABA content and increment following HRH treatment, which suggested that mung beans enriched in these free amino acids might accumulate higher amounts of GABA after HRH treatment and be useful for industrial applications.     

一种基于机器视觉的表面缺陷快速检测方法

实际生产过程中,产品表面会不同程度地留下污渍和印记,这对基于机器视觉的表面缺陷识别带来严重干扰.基于图案统计分析的识别方法速度虽快,但抗干扰能力弱,出现较高的误判率.基于深度学习的人工智能识别方法计算量巨大,速度慢,难以满足生产实际的高速要求.因此介绍一种改进SIFT算法,并给出了相关参数的设置方法和经验公式,通过实际表面缺陷的检测,对比验证了SIFT算法较强的鲁棒性和抗干扰能力,以及相关参数设置方法的正确性和可行性.实验数据表明,SIFT算法在凹陷类和斑点类缺陷的检出率上具有明显优越性,在裂纹类的误检率上也具有较大优势.特别是在有噪声图像干扰情况下,检出率比神经网络提升了20％,误检率降低了3％.     

Influence of geosynthetic reinforcement on the stability of an embankment with rigid columns embedded in an inclined underlying stratum

Incompressible dipping substrata are commonly encountered in engineering practice. Compared to horizontal underlying strata, the inclined underlying stratum increase the risk of collapse of embankments reinforced with columns because it weakens the restraint of the column base. The objective of this study is to investigate the effectiveness of geosynthetics on improving the embankment stability when the underlying stratum is inclined. The influence of geosynthetic tensile stiffness on the ultimate surcharge and failure mechanism is studied. A deep-seated failure with column tilting occurs when the geosynthetic tensile stiffness is low, whereas a lateral sliding occurs when the geosynthetic tensile stiffness is high. To illustrate the contribution of geosynthetics, the distribution of the lateral pressures acting on the columns is analyzed.     

Control of viscous fingering and mixing in miscible displacements with time-dependent rates

In miscible displacements encountered in enhanced oil recovery processes, the unfavorable viscosity contrast between injected solvent and oil usually leads to viscous fingering (VF), a hydrodynamic instability which may result in a lower sweep efficiency and oil recovery. This phenomenon can be observed in a wide range of flows in subsurface porous media. This study examined a simple cyclic time-dependent displacement rate and its effects on the onset and longer development of VF. It is found that such varying displacement rate can either stabilize or destabilize VF, depending on the cycle period, amplitude, and displacement scenarios. The most important mechanism is that such time-dependent rate can effectively change the competition between convection (destabilizing effect) and dispersion (stabilizing effect). This is different from the widely used constant injection rate where the flow instability is actually determined by the Peclet number and mobility contrast for a given scenario. This study therefore provided a new aspect to control VF, either enhance or reduce, with low additional costs. It is therefore both scientifically and practically important for a wide range of flows in subsurface porous media. © 2017 American Institute of Chemical Engineers AIChE J, 65: 360–371, 2019     

The effect of Nd3+ concentration on fabrication,microstructure, and luminescent properties of anisotropic S-FAP ceramics

Nd³⁺ doped strontium fluorophosphate (S-FAP), with chemical formula Sr₅(PO₄)₃F, nanopowders were prepared using the co-precipitation method. The prepared powders had no impurity phase with a grain size of about 30 nm and the doping limit of Nd³⁺ ions in strontium fluorophosphate is about 9 at.%. The morphology and particle size were determined by the doping concentration of Nd³⁺. Anisotropic Nd: S-FAP transparent ceramics with different Nd³⁺ doping concentrations were fabricated successfully by the simple hot-pressing method. The grain size of prepared S-FAP transparent ceramics decreased first and then increased with the increase of Nd³⁺ concentration. The 2 at.% Nd: S-FAP ceramic presented the highest optical transmittance at all wavelengths range. The characteristic transitions from the ground state to the excited states of Nd³⁺ ions were observed from the absorption spectra, and the absorption cross-section was calculated at 3.71 × 10^–20 cm². The influence of Nd³⁺ ion concentration on luminescence intensity and fluorescence lifetime was studied under 796 nm excitation. The strong emission of ⁴F_3/2→⁴I_9/2 transition in Nd: S-FAP was calculated by Judd–Ofelt (J-O) theory.     

Liquid-phase epoxidation of propylene with molecular oxygen by chloride manganese meso-tetraphenylporphyrins

Propylene molecule owns two active sites, the direct epoxidation of propylene by dioxygen is still a challenge due to the limitation of selectivity. In this work, the direct liquid-phase propylene aerobic epoxidation protocol by chloride manganese meso-tetraphenylporphyrin (MnTPPCl) was developed. The conversion of propylene was 12.7%, and the selectivity towards PO (propylene oxide) reached up to 80.5%. The formation of PO was attributed to the mechanism via high-valent Mn species, which was confirmed by means of in situ UV–vis spectrum.     

Tunable metamaterial absorber based on resonant strontium titanate artificial atoms

Dynamic control of the absorption frequency and intensity of metamaterial absorbers has attracted considerable attention,and many kinds of tunable metamaterial absorbers have been proposed.Unfortunately,due to the integration of separate resonant unit and tunable unit,these designed metamaterial absorbers suffer from complex structure and low sensitivity.We numerically and experimentally demonstrate a tunable metamaterial absorber composed of artificial dielectric atoms as both resonant and tunable unit arrayed periodically in the background matrix on the metallic plate.Polarization insensitive and wide incident angle absorption band with simulated and experimental absorptivity of 99%and 96%at 9.65 GHz are achieved at room temperature.The absorption frequency can be gradually modulated by temperature,however,the absorption intensity at working frequency remains near unity.The dielectric atoms based tunable metamaterial absorbers with simple structure have potential applications as tempe rature sensors and frequency selective thermal emitters.     

Fabrication of Co doped MoS2 nanosheets with enlarged interlayer spacing as efficient and pH-Universal bifunctional electrocatalyst for overall water splitting

Exploring inexpensive and active bifunctional electrocatalysts to produce hydrogen and oxygen from water at all pHs is highly desirable. Herein, we report a facile one-step method to prepare vertically aligned Co doped MoS₂ nanosheets with extended interlayer distance on carbon cloth (Co–MoS₂@CC) for full hydrolysis in both alkaline and acidic medium. Co–MoS₂@CC exhibits long-term durability with overpotentials of 56.6 mV and 130 mV for hydrogen generation and 242 mV and 201 mV for oxygen production at 10 mA cm^?2 in basic and acidic conditions, respectively. Moreover, we achieve low voltages of 1.585 V and 1.55 V in basic and acidic conditions respectively for the overall water splitting. We assume that such excellent property of Co–MoS₂@CC may be ascribed to the uncovering of more active sites and high porosity resulted from Co doping, which boosts the conductivity and thus reduces MoS₂ hydrogen adsorption free energy in HER, as well as benefits to catalytic active sites in OER. This one-step doping approach opens up new ways to regulate the intrinsic catalytic activity to catalyze total hydrolysis at all PHs.